Novak 3618
Ballistic Crawler Brushless Motor 18.5T

Like all Novak Ballistic motors, the Ballistic Crawlers contain an easy-to-adjust timing assembly, heavy-duty solder tabs and a removable nine-inch shielded sensor harness. And by taking advantage of the Ballistic's interchangeable wound-stator construction, crawlers can simply replace the installed 18.5-turn stator for any available stator between 13.5 and 21.5 turns. The motors are also equipped with a custom silicone gasket seal to keep dirt and debris from damaging the motor's sensor plug. The Ballistic Crawler motors also include a sintered rotor. The rotor's large diameter and exclusive magnetic material provide the motors with more torque and stronger braking. It also increases natural drag braking and improves the motor's initial throttle response, providing more control on steep climbs and downhill descents.

• Sensor-based for excellent braking and low-speed driveability
• Oversized front motor bearing for increased load handling and bearing life
• Completely rebuildable motor design
• Nickel-plated Neodymium Crawling Sintered Tuning 14mm Rotor; pinion shaft accepts all existing pinion gears
• Hand-wound stators

• Type: Brushless
• Bearings or Bushings: Bearing
• Wire Gauge: 14 AWG
• # of Turns/Windings: 18.5
• Voltage: 2-3S Li-Po cells, 4-9 Ni-MH cells (1.2V/cell)
• RPM/Volt (Kv): 2700
• Resistance (Ri): 0.7 m?
• Weight: 6.6 oz (187 g)