"......the device gave me an advantage over the field as my motor was cooler to start, and thus cooler at the end of the race. many drivers came to me and asked me how it was that my cat finished each run sooo strong the motor cooler is the answer"

-Peter Robinson, 2005 Reedy Race Spec Champion-

When tested back to back, there is no comparison. Device is meant to "freeze" a motor BEFORE it is run. This results in a much stronger race finish (more power at the end of the run because motor starts with much cooler temperature) as well as less wear and tear on the motor. Requires 12V power source with 4 amps of available output.

A Thermo-Electric motor cooler is actually a heat pump which cools the temperature of R/C Motors using a Peltier effect. When a 12V DC current is applied to the module, heat transfers from one side of the thermoelectric module to the other. The cold side is attached to the heat sink. Put your TMC on your motor before you start, the TMC will reduce the temperature of your motor almost to sub-zero temperatures. The prototype of TMC was tested by World champions - Marc Rheinard and Surikarn Chaidajsuriya at the 2005 TITC race in Thailand. Under extremely hot weather condition (the temperature of the track surface was over 60deg.C) the TMC delayed their motor's heating. As a result, their motors were free from the usual problems.

Specifications:

- Size: 52x58x72mm
- Weight: 178g
- Ampdraw: 3.0~3.8A
- Input: 3.0~3.8A
- 3 colors/colours of choice: Black, Blue, Purple