Novak 3122
Havoc Pro SC/Ballistic BL System: 8.5T 5000Kv

This system features the Havoc Pro SC Speed Control with Novak's advanced-timing software for sizzling performance in short course racing. Paired with Novak's top-sellig, fully re-buildable Ballistic 540 motors, they provide an affordable upgrade fora ll 2WD SCTs.

SHORT COURSE DESIGN

Since its release, the Havoc Pro SC has proven to be top of the line in its class. Its easy to use button and LED combinations make tuning at the track quick and easy. Short Course Truck Racing puts high demand on the ESC and motor, but these systems can handle any SC race! From the BEC to the Power Capacitor, the Havoc Pro SC is locked and loaded with great racing features.

The High-Power BEC is expertly paired with the high power steering service used for racing. The adjustability of the Dynamic Timing Advance ensures that no one will be faster than you down the strait! The ESC is also equipped with NovaBrakes(TM), providing an extremely smooth and powerful brake that is unmatched in performance and consistency. Like many of Novak's speed controls, the Havoc Pro SC has multiple adjustable parameters that allow you to customize your ESC with the push of a button. Even out of the box, the Havoc Pro SC is ready to race with no adjustments.

Ballistic 540 Stators are available in many winds!

BALLISTIC BRUSHLESS

Novak's signature Ballistic Motor contains easy-to-adjust timing assembly that alters the RPM range, and includes heavy-duty solder tabs that are strong enough to endure repeated soldering and tough crashes. Each Ballistic motor is also equipped with a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions, and Thermal Overload technology to ensure the motor is operating at a safe temperature.

The motors also feature a completely rebuildable design, allowing for the ability to upgrade or replace various motor parts. These celebrated motors also feature interchangeable wound stator construction, allowing the racer to change their motor's wind by simply replacing the motor's wound stator!

Motor Specs

Watts: 280

KV (unloaded): 5,000 RPM/VOLT

Motor Size: 2.07" x 1.41" (52.6 x 35.8mm)

Motor Weight: 6.6oz. (187.0g)

Compatible Novak Speed Controls: GTB, SLYDR, HAVOC 3S

Recommended Use: Slippery Track Conditions / Basher

• 14 Adjustable ESC parameters via on-board programmingfor complete customization
• Sensor-base design for excellent torque and low-speed driveability
• NovaBrakes provides extremely smooth and powerfulo brakes that are unmatched in performance and consistency
• User friendly One-Touch programming interface with five colored status LEDs to help personalize the ESC settings
• Silicone-sealed water-resistant ESC case
• Cross-cut ESC heat sink for reduced weight and efficient cooling
• ROAR-approved motor for short-course racing
• Re-buildable motor design with all items replaceable including bearings, rotor, sensor harness, and wound stator
• Designed, assembled and tested by Novak
• ***Motor Features***
• Sensor-based for excellent torque and low-speed driveability
• Oversized front bearing for increased load handling and bearing life
• Rebuildable design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells
• Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125" pinion shaft that accepts all existing pinion gears

• Input Voltage: 2S Li-Po Cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2v/cell)
• Motor Limit: 3.5 turn (540-size), 4.5 turn (550-size) sensored brushless motors
• Length: 1.16 in (29.5mm)
• Width: 1.47 in (37.3mm)
• BEC Voltage: High Power 6.0 volts DC/ 3.0 amps
• Wire Gauge: 14G Super-Flex Copper-Strand Silicone wire